When performing leak detections, structural cracking is a key thing to look at for leaks. They occur often up under bond beams, behind tile lines and even running down pool walls – but they aren’t always visible, and when they’re above the water line, they won’t make a noise. You have to keep your eyes open!
A lot of times you’ll find signs of bond beam breaks on patios, in the coping or in other areas where a PoolScope or a Pipe Mic aren’t used. Take a look at this patio and you can clearly see issues that are due to a structural default.
https://leaktronics.com/wp-content/uploads/signs-of-beam-breaks-1.jpg
Follow those breaks to see where they go. They most likely didn’t start up on the deck, but they formed on the deck as a result of a bigger problem.
In the video below, we’re showing you a pool that cost literally millions of dollars to build. it’s the size of a football field! During our inspection, we found a lot of mistakes, but from that cracking we saw first in the deck, we followed it to a severe structural crack that wrapped around an entire section of the pool, and it’s going to cost a bit to be repaired.
Check out the video, see what we found and visit https://leaktronics.com to learn about the online training for Complete Swimming Pool Inspections Including Leak Detection Training. By providing a proper leak detection, you are actually delivering a complete inspection on a pool. Doing a visual inspection doesn’t tell a homeowner, or a home buyer, if a pool is leaking. Get the whole picture, train today and receive the Pro Complete Leak Detection Kit free with the online training course, and learn how to provide a 300 point pool inspection AND a complete leak detection, on any pool, spa, fountain or structure that holds water.
Learn More Here: COMPLETE INSPECTION TRAINING
Or call 818-436-2953 for more information.
