LeakShot

$68.20$138.60

LeakShot works in two-fold. It seals leaks in pools, spas fountains, ponds, and vinyl liners and serves as a preventative maintenance product.

Add LeakShot regularly to your pool, spa, or fountain and keep potential leak areas from becoming a problem.

LeakShot is distributed in a 32 oz. pourable container with a screw-on safety cap. Use one for your current situation and keep one on hand for ongoing preventative maintenance.

Purchase Options:

  • 1 Bottle: $68.20
  • 2-Pack of Bottles: $104.50
  • 3-Pack of Bottles: $138.60
EAN: 100000142165 SKU: leakshot Categories: , Tag:

Description

BEFORE USING LEAKSHOT – CLICK HERE TO READ THE INSTRUCTIONS FOR USE

LeakShot is a fast-acting leak sealant applicable to all types of leaks in non-potable water sources. LeakShot packs the power to seal leaks in a variety of situations in just 24 hours! For leaks that are causing a water loss of up to an inch a day, you won’t need to drain a drop of water to make repairs. Just pour in LeakShot, and your leaks can go away in just a day.

LeakShot is applicable to:

  • Cement Swimming Pools
  • Fiberglass Swimming Pools
  • Vinyl Liner Swimming Pools
  • Gunite Swimming Pools
  • Spas
  • Hot Tubs
  • Ponds
  • Water Features
  • … and so much more!

LeakShot is a concentrated polymer-based liquid that is scientifically designed to penetrate cracks, holes and leaks and to self harden, forming a permanent seal that stops water loss.

LeakShot can be applied to pool shells, vinyl liners, concrete and fiberglass shells, wood spas and barrels and more.

* SHAKE WELL BEFORE USING *

It is important to note:

*Do not add LeakShot to ponds with fish or live creatures in the water. Remove all living things before adding LeakShot to the water. Clean or replace water thoroughly before re-introducing live creatures to the pond or pool.*

Bypass all filter media before adding LeakShot to the water.

Sand Filters: Set the filter valve to re-circulate.

Other types: Remove cartridges and DE elements from the filter tank. Then proceed to circulate through the empty tank.

With the pump running, add LeakShot slowly through the skimmer or in front of any other suction intake.

After adding LeakShot, adjust the suction to the main drain. If this is not possible, the vacuum cleaner could be used alternatively by simply placing the vacuum in the deepest part of the pool and connecting it to the normal vacuum connection.

LeakShot polymer fluid is heavier than water and has the potential to sink to the lowest point of the pool.  LeakShot can be stirred back into suspension, either manually using a pool broom or mechanically with an automated pool cleaner every 4-6 hours during the circulation of water.

Continue to recirculate water until the leak has stopped.

After the leak has stopped and given the proper time to cure (24-48 hrs.) you may return to normal filtration. Sand Filters: Set filter valve to filter and resume normal operation.  Backwash out any unused LeakShot.

Other Types: Re-install filter into tank and resume operation.  Rinse out any unused LeakShot from the filter as required.

PRECAUTION:
Keep Out Of Reach Of ChildrenLeakShot can cause severe eye and skin irritation. Do not get in the eyes, on the skin, or on clothing. Harmful or fatal if swallowed. Avoid contamination of food. Rinse the empty container thoroughly with water and discard it.

FIRST AID:
In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. For eyes, contact a physician. Remove and wash contaminated clothing before reuse. If swallowed, drink milk, egg whites, or gelatin solution. If these are not available, drink large quantities of water. Call a physician immediately.

NOTE: LeakShot has been thoroughly field-tested under various weather conditions, and has proven to be effective in sealing leaks.

Additional information

Weight 1 lbs
Dimensions 4 × 8 × 8 in
Choose Quantity:

1 Bottle, 2-Pack of Bottles, 3 Pack of Bottles

Go to Top