
LeakShot
PRODUCT DETAILS
BEFORE USING LEAKSHOT – CLICK HERE TO READ THE INSTRUCTIONS FOR USE
LeakShot is a fast-acting leak sealant designed for all types of leaks in non-potable water sources. It has the power to seal leaks in just 24 hours! For leaks that cause water loss of up to an inch daily, you won't have to drain any water to make repairs. Simply pour in LeakShot, and your leaks can be sealed within a day.
LeakShot works on:
- Cement swimming pools
- Fiberglass swimming pools
- Vinyl liner swimming pools
- Gunite swimming pools
- Spas
- Hot tubs
- Ponds
- Water features
- … and much more!
LeakShot is a concentrated, polymer-based liquid designed to penetrate cracks, holes, and leaks, and to self-harden, forming a permanent seal that stops water loss.
LeakShot can be used on pool shells, vinyl liners, concrete and fiberglass shells, wood spas, barrels, and more.
*SHAKE WELL BEFORE USING
* DO NOT ADD LEAKSHOT TO PONDS WITH FISH OR OTHER LIVE CREATURES IN THE WATER. Remove all living things before adding LeakShot. Thoroughly clean or replace the water before reintroducing live creatures to the pond or pool.
Bypass all filter media before adding LeakShot to the water.
Sand Filters: Turn the filter valve to the recirculation setting.
Other types: Remove cartridges and DE elements from the filter tank, then circulate through the empty tank.
With the pump running, slowly add LeakShot through the skimmer or in front of any other suction intake.
After adding LeakShot, adjust the suction to the main drain. If that's not possible, you can alternatively use the vacuum cleaner by just placing it in the deepest part of the pool and connecting it to the standard vacuum port.
LeakShot polymer fluid is heavier than water and can sink to the bottom of the pool. LeakShot can be re-suspended either manually with a pool broom or mechanically with an automatic pool cleaner every 4-6 hours during water circulation.
Keep recirculating water until the leak ceases.
After the leak has stopped and given the proper time to cure (24-48 hours), you may return to normal filtration. Sand Filters: Set the filter valve to 'filter' and resume normal operation. Backwash out any unused LeakShot.
Other Types: Reinstall the filter into the tank and resume operation. Rinse out any unused LeakShot from the filter as needed.
PRECAUTION:
Keep out of reach of children. LeakShot can cause severe eye and skin irritation. Do not get in the eyes, on the skin, or on clothing. It may be harmful or fatal if swallowed. Avoid contamination of food. Rinse the empty container thoroughly with water before disposing of it.
FIRST AID:
In case of contact, immediately rinse eyes or skin with plenty of water for at least 15 minutes. For eye contact, see a doctor. Remove and wash contaminated clothing before reuse. If swallowed, drink milk, egg whites, or gelatin solution. If these are not available, drink large amounts of water. Call a doctor immediately.
NOTE: LeakShot has been extensively field-tested in different weather conditions and has consistently proven effective at sealing leaks.